 |
Taylor K-1563ChemWorld is a distributor of Taylor Technologies Test Kits and Reagents. Order directly online and save today.
DROP TEST SODIUM NITRITE (1 drop = 100 ppm)
COMPONENTS:
1 x 4026 Dipper, plastic, large
1 x 4086 Stirring Rod, 5", plastic
1 x 5043 Instruction
1 x 9010 Pipet, Calibrated 0.5 & 1.0 mL, plastic
w/red cap
1 x 9198R Sample Tube, Graduated, 25 mL, plastic
w/cap and red dot
1 x R-0730-C Permanganate Reagent, 2 oz
1 x R-0781-II Acid Sulfate, 50 g
1. Rinse and fill 25 mL sample tube (#9198R) to 25 mL
mark with water to be tested.
2. Using the large dipper (#4026), add 1 dipper R-0781
Acid Sulfate. Stir with rod (#4086) to dissolve.
3. Using a 1.0 mL pipet (#9010), add R-0730
Permanganate Reagent dropwise, swirling and
counting after each drop, until color changes from
colorless to a faint but permanent pink, which
persists for at least 1 minute. Always hold pipet
in vertical position.
4. Multiply drops of R-0730 Permanganate Reagent by
100. Record as parts per million (ppm) sodium
nitrite.
NOTE: For results as nitrite, multiply sodium nitrite
concentration by 0.67.
This product ships within approx. 5 to 7 business days from the state of Maryland.
Listed below is the shipping transit time for 2024. UPS transit map - This product only ships UPS. We can not ship this product via Fedex or USPS.
- We can ship internationally.
- We can not ship this product to a PO box.
- If the product is Haz mat. It can not can not ship this via Air.
You will receive the tracking info after the order ships within 48 to 72 hours. We do not offer expedited shipping for this product.
If you can not order online, call in your order at 800-658-7716.
|
|
|
Order 
