 |
 |
 |
|
1/2" PVC Injection Quills
1/2" diameter PVC chemical injection quills.
- This product comes WITH an internal check valve.
- This standard quill length of 2 3/4" is ideal for injecting into a 4" diameter pipe.
- Good up to 150 psi.
- Check valve crack open pressure 10 psi.
- Good up to 100F.
- This 1/2" NPT injection quill may be order with NO internal check valve.
- For 3/4" NPT fittings, consider using a 3/4" PVC injection quills.
- 1/2" NPT longer injection quills up to 24" in length are available.
These Quills are made from PVC. The units only require Teflon tape and hand tightening.
Over tightening or tightening with a wrench, pipe wrench or similar tool can put too much pressure on the quills what might lead to damages and quill failure.
ChemWorld also stocks
Kynar, Stainless Steel, and C-20
injection quills. For chemical applications that never shut down, consider using a PVC corporation stop valves.
Review the
Product Bulletin for more information.
These PVC Injection Quills ships for free daily from Atlanta, Georgia. M-F only.We typically ship the same day if ordered by 1 - 3 pm depending on the order volume.
This product ships FedEx Ground or Free 2 day within the 48 states.
Notes:
- We only ship via FedEx Ground or 2-Day. No UPS or USPS.
- We can not ship to PO boxes.
- This map illustrates service schedules in business days as of Jan 2020.
- ChemWorld is not responsible for delays due to weather or FedEx transit issues. Please take this into account when ordering.
Overnight / Expedite Shipping:
- Orders must be received by noon EST.
- We only ship FedEx expedite shipments.
- To calculate your costs, log into your FedEx account. The product weighs less than 2 pounds and is packaged in a 4" x 4" x 8" box. Origin zip code is 30144.
Directions for Expedite Shipping:
- Must order by noon EST.
- Order as normal through the website.
- If you have a FedEx account number, enter it in the notes section during ordering with your exact shipping requirements Next Day 8:30, Next Day 10:30, or Next Day 20:00. We will email you ASAP.
- If you do NOT have a FedEx account number, the cost is $75 for Next Day 10:30 AM.
Email is the fastest form of communication, email us at [email protected].
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Frequently Asked Questions
What is your lead time on this chemical injection valve? This product typically ships within two days, if you do need it rushed, please call us at 800-658-7716 and see if we can expedite it for you.
What quill do you recommend for 8% chlorine injection? Both our PVC and Kynar Quill Series have great compatibility with that chemical.
I need an Injection Quill. 1/2" PVC but i want the stinger to be 5". Do you offer that? Yes, you can purchase our QC-PVC-50-SP with an Injector length up to 24".
|
|
|
|
|
|
|
