#1 in Distributing Specialty
Chemicals & Equipment

Email Us Today Free shipping on
all chemicals (48 states)

  Home > Post Treatment Fluids > Paint and Coating Removers >

Paint Booth Paint Stripper (Heated Tank) - 5 Gallons
Paint Booth Heated Tank Paint Stripper
Paint Booth Heated Tank Paint Stripper
  
Paint Booth Paint Stripper (Heated Tank) - 5 Gallons
Our Price: $499.99
Sale Price: $419.99
Savings: $80.00

Quantity in Stock:6

Free Shipping
Availability: Usually Ships in 3 to 5 Business Days
Product Code: STRIP-SAFE-5
Qty:

Description Shipping & Transit Times
 

Paint Booth Paint Stripper

Non-Methylene Chloride Paint, PowderCoat, Ink, and Adhesive Remover. Multi-metal safe alkaline cold and moderate-heated tank paint stripper. Does not contain methylene chloride or phenol.

ChemWorld SAFE is a single phase, alkaline, non-methylene chloride paint and coating remover with special paint penetration agents..

ChemWorld SAFE was specifically formulated for the removal of epoxies and polyurethane top coats, polydisulfide primers, and today’s new difficult to remove powder coatings. Pretesting of stripping ability on finishes is always advised.

APPLICATION
  • Use as received. Can be heated to 150°F maximum to decrease stripping time. Use with alkaline and solvent resistant tank and equipment.
  • Note: Vapor release can increase as the temperature increases.
  • ChemWorld SAFE recommends floating ChemWorld SAFE Vapor Barrier on top of the tank if the operation is not completely self-contained. This will eliminate most or all solvent odor, reduce fuel usage, and allow, in most cases, a higher more controlled operational temperature.
Frequently Asked Questions
Is Chemworld Strip Safe ok to use with aluminum? Our tank temperature can range from ambient to 180 degrees. Yes, it can be used for Aluminum but these steps have to be followed:
  • No water can be added to the solution or it will begin to attack the aluminum.
  • The temperature should not be raised above 160’F
  • Either the chemical seal must be added, OR, a lid must be on the tank to prevent odors and product loss.

Share your knowledge of this product. Be the first to write a review »