![](/v/vspfiles/templates/ChemWorldNEW/images/DBox_Border_Left_Top.gif) |
![](/v/vspfiles/templates/ChemWorldNEW/images/clear1x1.gif) |
![](/v/vspfiles/templates/ChemWorldNEW/images/DBox_Border_Right_Top.gif) |
![](/v/vspfiles/templates/ChemWorldNEW/images/clear1x1.gif) |
Paint Booth Immersion Paint Stripper
Immersion paint stripper formulated to remove urethanes, epoxy, powder coating, e-coating, C.A.R.C, and difficult-to-remove coating systems. ChemWorld Immerse is:
- A unique environmentally sensitive immersion paint stripper formulated to remove urethanes, epoxy, powder coating, e-coating, C.A.R.C, and difficult-to-remove coating systems.
- Does not contain hazardous ingredients such as phenol, creosol, chromate, cresylic acid, or methylene chloride.
- Was formulated to stryp coatings from all ferrous metals and most non-ferrous metal without effect on the metal. Recommended operating temperature for quickest stripping results is 120F to 140F, but most stripping can typically be completed at room temperature.
Hazardous Ingredients:
- Benzyl Alcohol - Cas No. 100-51-6
- Aromatic Sulfonate Detergent - proprietary blend
- Dihydrogen Sulfate - Cas No. 7664-93-9
- Hydroxyacetic Acid - Cas No. 79-14-1
APPLICATION:
- Use as received, but can be cut 50/50 with water for light-duty or single coat paint removal.
- Heat from ambient to 140F (Heat will significantly decrease strip time on almost every coating).
- Use heat and acid resistant tank, piping, and equipment.
- Mix or recirculate when heated, as components could separate during lengthy heating periods.
- Cover tank when possible to minimize product evaporation.
- Remove parts slowly from the process tank to minimize product drag-out.
- Let parts drain over the tank whenever possible. Rinse in fresh water after stripping.
- Remove stripped paint from tank often. This will extend tank life and minimize paint removal time.
This product ships as NOT REGULATED BY DOT (acidic cleaning liquid NOIBN).
We list only 5 gallon pails for small volume users. For 55 or 275 gallon containers please, email us with your zip code at [email protected] for a delivered price.
This product is manufactured to order and ships within 3 days from of New York. For different container sizes, please contact us at [email protected]. Below is the ground transit time to your USA location. Free shipping transit time in business days as of June 2023 (After Production). This product is available for international shipping. We can stock the product at our Salt Lake City, UT or Atlanta, GA locations for frequent users.
|
|
![](/v/vspfiles/templates/ChemWorldNEW/images/clear1x1.gif) |
![](/v/vspfiles/templates/ChemWorldNEW/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/ChemWorldNEW/images/clear1x1.gif) |
![](/v/vspfiles/templates/ChemWorldNEW/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/ChemWorldNEW/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/ChemWorldNEW/images/clear1x1.gif) |
![](/v/vspfiles/templates/ChemWorldNEW/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/ChemWorldNEW/images/DBox_Border_Left_MidDiv.gif) |
![](/v/vspfiles/templates/ChemWorldNEW/images/clear1x1.gif) |
![](/v/vspfiles/templates/ChemWorldNEW/images/DBox_Border_Right_MidDiv.gif) |
![](/v/vspfiles/templates/ChemWorldNEW/images/clear1x1.gif) |
Frequently Asked Questions
- Will your Paint Stripper Chemworld Paint Immerse go through 5 plus inches of both epoxy primer and polyurethane paint on the floor?
- It would be nearly impossible to get through 5” thick epoxy primer and polyurethane paint with a chemical. 1/4” is about the maximum. That paint must be manually removed first, then a paint removal program can be started.
|
|
![](/v/vspfiles/templates/ChemWorldNEW/images/clear1x1.gif) |
![](/v/vspfiles/templates/ChemWorldNEW/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/ChemWorldNEW/images/clear1x1.gif) |
![](/v/vspfiles/templates/ChemWorldNEW/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/ChemWorldNEW/images/clear1x1.gif)
|