 |
 |
 |
|
Kathon Test Kit
The new KATHON (
Isothiazolin) Microbiocide test kit enables the rapid and accurate measurement of active microbicide in a range of industrial cooling water applications. The test can be performed on-site at the cooling tower, eliminating the requirement to return the sample to a laboratory for evaluation. The KATHON kit has been designed to be simple and easily used by operators regardless of their experience.
Reagents for 50 test, Color Scale Disc, 2 Sample Cells, and Instruction Manual and Carrying Case included. Life of reagents are dependent on storage conditions.
- Add 4 drops of dK1 to an empty 10ml tube and fill to the 10ml mark with the sample. Cap the tube and shake to mix.
- Remove the cap and add 15 drops of dK2 to the test tube. Cap and invert gently to mix. Let it rest for 1 minute.
- Remove the cap and add 17 drops of dK3 to the test tube. Cap and invert gently to mix. Let it rest for 1 minute.
- Remove the cap and add 15 drops of dK4 to the test tube. Let it rest for 1.5 minutes.
- Remove the cap, and add 3 drops of dK5 to the test tube. Cap and invert gently to mix.
- Allow 10 seconds for color development. Then, looking down through the tube, with the cap removed, compare the color produced in the tube to the color standards printed on the comparison chart. Match to the nearest standard and read off the corresponding concentration value as Isothiazolone in mg/l (ppm).
Kathlon test kit SDS
This product ships within 48 to 72 hours from the south side of Chicago. For rush orders, we must receive the order by 10 am EST.
UPS transit map
- This product only ships UPS. We can not ship FedEx or USPS.
- We can ship internationally.
- We can not ship this product to a PO box.
You will receive the tracking info after the order ships with 72 to 96 hours.For expedite order:
- Order your product before 10 am EST.
- Order online and insert a note during checkout with specific expedite instruction (Red overnight, etc).
- If you have a UPS account number enter it in the notes section upon ordering.
- If you do NOT have a UPS account number, we will contact you with the additional costs. Provide your 3 or 4 digit security code in the note section upon check out to speed the process up.
- Email is the fastest way to communicate with us. We will contact you ASAP. Email us at [email protected].
We are fast at responding! If you can not order online, call in your order at 800-658-7716 with specific instructions.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Frequently Asked Questions
We are doing a project which involves the detection of Kathon in jet fuel and water mixtures. I am assuming we can use the test kit you make for water measurement. I have some additional questions:
1. Does this kit detect the active ingredients (CMIT and MIT) or does it detect the Dipropylene glycol solvent?
2. Does the measurement of 7.5 mg/L count isothiazolin (either chlorinated or not), or does it count the chlorine only.
3. Will this detection system work with jet fuel, or does it need to be conducted in water only?
Does the Isothiazoline Test Kit differentiate between CMIT and MIT? No, it does not differentiate.
Does the kit detect Dipropylene glycol solvent? No.
Does the kit only count 7.5 mg/L of Isothiazolin (chlorinated or not) or only the chlorinated part? Chlorinated or not.
Will the test detect if the sample is jet fuel? It has not been tested in this matrix and the customer would have to check the efficiency.
|
|
|
|
|
|
|
order process 
