#1 in Distributing Specialty
Chemicals & Equipment

Email Us Today Free shipping on
all chemicals (48 states)

  Home > Pre-Paint & Metal Finishing >

Iron Phosphate Sealing Rinses - 5 Gallons
Iron Phosphate Sealing Rinses
Iron Phosphate Sealing Rinses
  
Iron Phosphate Sealing Rinses
Our Price: $249.99
Sale Price: $199.99
Savings: $50.00

Quantity in Stock:32

Free Shipping
Availability: Usually Ships in 3 to 5 Business Days
Product Code: ZR-POLYSEAL-5
Qty:

Description Shipping & Transit Times
 

Iron Phosphate Sealing Rinses

Nanotechnology Sealing Rinse for Outstanding Paint Adhesion and Corrosion Resistance on Steel, Galvanized, and Aluminum Substrates. Non-chrome zirconium polymer nanotechnology sealing rinse. Provides salt spray results approaching and in some cases equaling chrome. ChemWorld ZR Poly Seal is:
  • A clear nanotechnology coating formulated for both outstanding corrosion inhibition and superior paint adhesion on ferrous metals, aluminum, and galvanized substrates. The imperceptible coating contains a blend of organic and inorganic polymeric compounds which naturally and permanently bond with clean metal without changing the outward appearance and brightness of the substrate. In many cases, salt spray results and impact resistance can more than double over traditional non-chrome seals.
  • Provides superior paint adhesion and corrosion resistance to the applied paint finish over traditional phosphoric or phos/moly non-chrome sealing rinses.
  • Seeks out and fills any voids in the primary phosphate coating.
  • Does not contain regulated heavy metals, and is acceptable for almost any waste treatment facility or regional POTW.
  • An excellent replacement to traditional phosphorus based coatings when phosphates can not be used or discharged.
USE INFORMATION:
Concentration:
  • Sealing of Phosphate Coating: Target: 1.0% by volume, Range: 0.5 – 2.0% by volume.
  • Stand Alone Coating: Target: 2.0% by volume, Range: 1.0 – 2.5% by volume.
Private labeling and custom packaging available from 1 oz to 326 gallon totes. Please email us at [email protected] for detailed pricing.

For technical recommendations, please email us at [email protected].
Frequently Asked Questions
We are a furniture manufacturer and bought 5 gallons of your Iron Phosphate Sealing rinse to pretreat our welded steel piece before powder coating. Could you please advise us as to the best way to apply to our steel furniture? We were wondering if we'd be able to apply the ChemWorld ZR Poly Seal using a yard sprayer/or sponge?
It will be fine to use a garden sprayer or large sponge (with a rubber gloved hand!) and run the ChemWorld ZR Poly Seal at 1% BV with water on CLEAN and pre-treated metal. Oil MUST be removed prior to application. Let the product dry on the metal.
We are working on a large SA36-grade carbon steel tank, and we are looking for a treatment before applying the final paint which will be a direct to metal enamel. Is the ZR Poly Seal suitable?
Yes, our PolySeal formula is the best option for this.
Is there a no rinse version?
This formula is both a rinse and/or no-rinse version. If it is non-rinse, the make-up water should be as clean as possible, which usually implies RO or Deionized Rinse water. The less conductive solids, the better for coating adhesion.

Share your knowledge of this product. Be the first to write a review »